LOW-LOSS MICROELECTRODES FABRICATED USING REVERSE-SIDE EXPOSURE FOR A TUNABLE FERROELECTRIC CAPACITOR APPLICATION
Yong-Kyu Yoon, J Stevenson Kenney, Andrew Hunt and Mark Allen
Narrowly spaced thick microelectrodes are fabricated using a self-aligned multiple reverse-side exposure scheme for an improved quality-factor tunable ferroelectric capacitor. The microelectrodes are fabricated on a functional substrate?a thin film ferroelectric (barium strontium titanate, BST; BaxSr1−xTiO3) coated sapphire substrate, which has an electric-field-dependent dielectric property providing tuning functionality, as well as UV transparency permitting an additional degree of freedom in photolithography steps. The microelectrode process has been applied to interdigitated capacitor fabrication, where a critical challenge is maintaining narrow gaps between electrodes for high tunability, while simultaneously forming thick electrodes to minimize conductor loss. A single mask, self-aligned reverse-side exposure through the transparent substrate achieves both these goals. A single-finger test capacitor with an electrode gap of 1.2 ?m and an electrode thickness of 2.2 ?m is fabricated and characterized. Tunability (T = 100 ? (C0 − Cbias)/C0) of 33% at 10 V has been achieved at 100 kHz. The 2.2 ?m thick structure shows improvement of Q-factor compared to that of a 0.1 ?m thick structure. To demonstrate the scalability of this process, a 102-finger interdigitated capacitor is fabricated and characterized at 100 kHz and 1 GHz. The structure is embedded in a 25 ?m thick epoxy resin SU-8 for passivation. A quality factor decrease of 15?25%, tunability decrease of 2?3% and capacitance increase of 6% are observed due to the expoxy resin after passivation. High frequency performance of the capacitor has been measured to be 15.9 pF of capacitance, 28.1% tunability at 10 V and a quality factor of 16 (at a 10 V dc bias) at 1 GHz.
Keywords: Electronics and devices, Instrumentation and measurement and Nanoscale science and low-D systems